Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Sustainability Label

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Comfortable, flexible and durable 4-way stretch. Good washing abilities. The fibre is partially bio-based, which contributes to reducing the climate footprint

Lightweight, water-repellent and durable fabric that protects you from dirt.

Lighter quality that protects against dirt and splashes but, at the same time, maintains flexibility in the garment. Very suitable for industry and service. Colur and dimensionally stable. Water repellent finish.

Wind- and waterproof fabric with breathable function and stretch effect.

Lightweight 3-layer softshell fabric with 4-way stretch. Wind- and waterproof, breathable.

Stretchy, comfortable and compliant grid fleece, structure that creates the best combination between warmth, insulation and breathability.

Polyester microfleece, antipilling, brushed on both sides.

Wind- and waterproof fabric with breathable function.

Built for pace and visibility. The main fabric is a comfortable, flexible and durable 4-way stretch that delivers all-day comfort, while ventilating mesh panels at the knees and yoke help you keep the right temperature when work ramps up. 
The ToolRig™ rail runs 360° around the waist, letting you move pockets and accessories freely. ToolRig™ tool pockets and a hammer holder bracket are included, and they are detachable, which is ideal when switching tasks. For heavier rigs, the trousers feature loops for ToolRig™ braces/harness for better ergonomics and load management. 
Knee work stays comfortable and secure with kneepad pockets in reinforced CORDURA® stretch. Storage is generous with extra-wide tool pockets, CORDURA® reinforcements where wear is highest and a raised back waist that keeps you covered in motion. Segmented reflective tape makes sure you are seen when it matters most.
<ul>
<li>Comfortable, flexible and durable 4-way stretch</li>
<li>Ventilating mesh panels at knees and yoke</li>
<li>ToolRig™ rail 360° around the waist – move pockets and accessories freely</li>
<li>ToolRig™ tool pockets and hammer holder bracket included</li>
<li>Loops for ToolRig™ braces/harness for better ergonomics and load management</li>
<li>Kneepad pockets in reinforced CORDURA® stretch</li>
<li>Raised back waist</li>
<li>CORDURA®-reinforced tool pockets</li>
<li>Segmented reflective tape</li>
</ul>

ToolRig™ Hi-Vis Trousers 4-Way Stretch

Industrial laundry-compatible hi-vis trouser with a modern fit, designed for professional users who demand visibility, durability and straightforward functionality. 
The trouser is water-repellent, feature pre-bent legs for optimal comfort and reflective details at the leg ends for increased visibility. CORDURA®-reinforced knee pad pockets provides reliable durability and flexibility, allowing you to work efficiently and comfortably all day. 
Reflective details at the leg ends for increased visibility. A reliable choice for safety and durability during long working days.

Hi-vis Trousers

Industrial laundry-compatible hi-vis trouser with a modern fit, designed for professional users who demand visibility, durability and straightforward functionality. 
The trousers feature pre-bent legs for optimal comfort and reflective details for increased visibility. CORDURA®-reinforced knee pad pockets provides reliable durability and flexibility, allowing you to work efficiently and comfortably all day. A reliable choice for safety and durability during long working days.

Hi-vis Trouser

A hi-vis hood in windproof and waterproof material designed to be worn over a beanie. Fits a range of jackets, men’s and women’s, from lighter shells to winter jackets, for example 4760, 4435 and 4455. Not designed to be worn over a helmet.

Hi-Vis Hood

Industrial laundry-compatible hi-vis bib trouser with a modern fit, designed for professional users who demand high visibility, durability and straightforward functionality. 
The bib trouser is water-repellent, feature pre-bent legs for optimal comfort and reflective details at the leg ends for increased visibility. The bottom-loading CORDURA®-reinforced knee pad pockets provides reliable durability and flexibility, allowing you to work efficiently and comfortably all day. 
Dark panels in areas that get dirty easily help keep the garment looking clean and professional. A reliable choice for safety and durability during long working days.

Hi-vis Bib Trousers

An industrial-launderable hi-vis vest with a great fit, designed for professionals who demand high visibility, durability and straightforward functionality. The vest is two-tone with segmented reflective tape. The material is water-repellent. Certified to EN ISO 20471, Class 2 – high visibility. 
Also available as women’s model 3092.

Hi-Vis Vest

A lightly lined winter softshell jacket that is extremely soft, comfortable and flexible thanks to its fabric. The jacket is two-tone with predominantly dark sections, which resists dirt very well while still delivering high visibility when it matters most. Air-mesh lining optimises circulation in the jacket, allowing it to breathe and release excess heat and moisture. 
This hi-vis jacket has both the light, stretchy feel and the strength a work garment should have. The fabric is windproof and waterproof yet highly breathable. It also features a detachable hood. Certified to EN ISO 20471, Class 1 – high visibility. 
Also available as men’s model 4489.

Women’s Hi-Vis Lightweight Lined Winter Softshell Jacket

A lightly lined winter softshell jacket that is extremely soft, comfortable and flexible thanks to its fabric. The jacket is two-tone with predominantly dark sections, which resists dirt very well while still delivering high visibility when it matters most. Air-mesh lining optimises circulation in the jacket, allowing it to breathe and release excess heat and moisture. 
This hi-vis jacket combines the light, stretchy feel you want with the strength a work garment must have. On top of that, the material is windproof and waterproof yet highly breathable. It also features a detachable hood. Certified to EN ISO 20471, Class 1 – high visibility.
Also available as women’s model 4406.
<ul>
<li>3-layer softshell</li>
<li>Breathable</li>
<li>Lightly lined</li>
<li>Windproof and waterproof fabric</li>
<li>Zip in lining for branding</li>
</ul>

Hi-Vis Lightweight Lined Winter Softshell Jacket

A fleece that combines hi-vis panels with segmented reflective tape to guarantee very good visibility in exposed environments. The inside uses a grid-patterned knit with channels that creates the perfect combination of insulation, ventilation and moisture transport. The jacket has a close, body-hugging fit and mesh under the arms for increased ventilation. Certified to EN ISO 20471, Class 1 – good visibility.
<ul>
<li>Durable, body-hugging 4-way stretch</li>
<li>Mesh underarms for increased ventilation</li>
<li>Good insulation, ventilation and moisture transport</li>
<li>Thumb grips at the cuffs</li>
<li>Two side pockets</li>
</ul>

Hi-Vis Fleece Jacket

Microfleece jacket made from lightweight, anti-pilling fleece – ideal to wear as a jacket or as a second layer. Brushed on both sides for a soft and comfortable feel. Hi-vis panels and wide, segmented reflective strips keep you visible when it matters most. 
Also available in women’s model 4718.

Microfleece Jacket

Microfleece jacket made from lightweight, anti-pilling fleece – ideal to wear as a jacket or as a second layer. Brushed on both sides for a soft and comfortable feel. Hi-vis panels and wide, segmented reflective strips keep you visible when it matters most. 
Also available in men’s model 4713.

Women’s Microfleece Jacket

A lightweight lined autumn and winter high-visibility jacket with excellent features for cooler weather conditions. The jacket is wind- and waterproof with taped seams. Printed reflective details on the shoulders ensure good visibility even from above. Prepared with press studs for attaching a high-visibility hood model 2165, 2166 or 2175, sold separately.
Also available in men’s model 4780.

Women’s Lightweight Lined Winter Jacket Hi-Vis

Wind and waterproof winter overall, Class 3 hi-vis, with taped seams and padded lining for much-needed warmth in low temperatures. The overall has stretch in the back for better flexibility, and a bellowed back for greater freedom of movement. 
The hood is detachable and adapted for helmets and ear defenders. Interior knee pad pockets, two-way side zip up to the waistband, and a hammer holder at the waist on both sides. 
You can attach the detachable tool pockets 2170, sold separately. To reach different leg lengths, we offer this overall in 2 lengths. Ex. Size Large: LS=short -4, L=XX cm.

Hi-Vis Winter Overall

A wind and waterproof winter overall with taped seams and quilted lining, providing essential warmth in cold temperatures. It features stretch in the back for better flexibility when bending and a zipped back ventilation. 
The material is wind and waterproof with breathability. The hood is detachable and designed to fit helmets and ear protectors. Includes internal kneepad pockets, two-way side zips up to the waistband and hammer loops on both sides of the waist. 
The overall has a waist belt and is prepared with attachments for CORDURA® tool pockets (art. 2170), sold separately.

Women’s Winter Overall Hi-Vis

Hi-vis shorts made entirely out of incredibly soft and flexible 4-way stretch that really delivers the ultimate comfort and makes you visible when it’s needed the most. 
The shorts have segmented reflectors, high waist at the back, detachable tool pockets and ventilation in the yoke. 
Also available in a women’s model 7020.