Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW COLOUR!

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Polyuretan coated (PU) polyester, wind- and waterproof fabric with breathable function. 

Flame resistant PVC material that is wind-and waterproof. The fabric is certified for EN 1149-3, EN ISO 14116 Index 3, EN ISO 61482-1-2 class 1, EN 343 class 4,1, EN ISO 20471.

Quality 1516 is a flame-retardant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1514 is a flame retardant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1513 is an inherent fabric which means that the flame resistant properties are built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471. 

Vest in a soft, supple material offering high durability. A popular model among installers and electricians who are used to carrying a lot of equipment. Several multifunctional pockets that help make day-to-day tasks easier. 
The vest is metal free and has plastic press studs and zip. Heat-applied reflective details for enhanced visibility and loops around the waist designed for a belt that can relieve weight.

Inherent Vest

A women's fit industrial jacket in a soft, supple, comfortable, highly durable quality. The metal-free (buttons and covered zips in plastic) jacket has dirt- and water-repellent properties. Hidden chest pocket with zip, two front pockets with flaps and press studs, and loops for a microphone, oximeter or other technical device. 
Extended, width-adjustable back, and the cuff width is also adjustable using press studs. The collar can be closed with two press studs for extra protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Women's Inherent Jacket

A metal-free industrial jacket in a soft, supple, comfortable quality. Highly durable and dirt- and water-repellent. Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device. 
Extended, adjustable back, and the cuff width is also adjustable using press studs. High collar for greater protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Inherent Jacket

Rain trousers in multinorm with braces and reinforced knees, making it a tough garment who can resist the most. Has welded seams. The drawstring at the waist allows the pants to be comfortable and the adjustable waistcoats prevent moisture from finding its way in. External pocket for folding rule. 
Certified according to EN 343, EN 13034, EN ISO 20471, EN ISO 14116.

Flame resistant rain trousers

Flame resistant rain trousers for you with tasks that require durable but at the same time flexible rainwear that you must also be visible in. The trousers are wind and waterproof with welded seams that do not allow any moisture to penetrate. 
Good fit with wide elastic at the back, adjustable and detachable braces and adjustable leg ends with buttons and velcro. Leg pocket with bellows and lid, opening with lid for the possibility of hanging out tool pockets. Has transfer reflexes. 
Certified according to EN 1149-5. EN ISO 20471. EN 343. EN ISO 14116. IEC 61482-2.

Multinorm rain trousers Level 2

Soft, supple, comfortable trousers optimized for environments that require strong protection combined with high user comfort. The trousers are made from an oil-, dirt- and water-repellent material. 
This garment is metal free, and has plastic buttons and zip. Raised back section with elastic in the side waist for enhanced comfort. Bellowed leg pockets with flaps, internal ID card holder. The trousers have two back pockets with press-studded flaps. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 13034, EN 61482-2.

Inherent Trousers

Metal-free craftsman trousers for use in areas that require flexibility and good protection. The trousers offer high comfort and sewn-on holster pockets. Raised rear waist section with elastic in the sides for enhanced comfort. Bellowed leg pockets, the left with an ID card holder, and two back pockets with press studs. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Craftsman Inherent Trousers

Trousers made from a soft, supple, durable material, with a thin lining inside the front. In the lined areas, the trousers are approved to the higher arc flash protection class, APC 2. One bellowed leg pocket with flap, interior ID card holder and phone holder on the left side, a bellowed ruler pocket with flap on the right. 
The trousers have two back pockets with press-studded flaps. This is a metal-free garment with plastic press studs and zip. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 where lined), EN 13034.

APC 2 Inherent Trousers

Flame resistant, long-lasting work trousers with a good fit. These oil, dirt and water-repellent trousers have functional details throughout, for example bent legs and reflective details at the bottom and spacious handling pockets with many functions. Internal knee pad pockets increase comfort when working on your knees. 
Certified to EN 14404, EN 1149-5, EN ISO 11612, IEC 61482-2. ATPV: 16,0 cal/cm².

Flame resistant craftsman trousers

The Multinorm trouser provides you with the maximum protection when working in harsh environments. The oil, dirt and water-repellent garment is made from a durable material and features a comfortable fit and Cordura®/Kevlar®/Protal™-reinforced knee protection pockets with the possibility of two placement levels. 
Functional pocket solutions for your tools and carefully considered details such as darker fabric where most exposed to dirt. Industrially washable. Protects against liquid chemicals. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm trousers

Oil, dirt and water-repellent multinorm craftsman trouser that offers you the ultimate protection when working in harsh environments. 
An advanced craftsman's trouser with fixed tool pockets in durable material and reinforced knee protection pockets in Cordura®/Kevlar®/Protal™ with the possibility of two placement levels. Industrially washable. 
Certified according to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11,0 cal/cm².

Multinorm craftsman trousers

Flame resistant service trousers, ideal for maintenance work. Flexible and hard-wearing service trousers in inherent material with stretch sections, specifically suitable if you carry out maintenance work both indoors and outdoors in warmer temperatures. 
These oil, dirt and water-repellent trousers have a narrower fit and stretch panels in the crotch, seat and knees giving them even more flexibility and movement. 
Certified to EN 1149-5, EN ISO 11612, IEC 61482-2. ATPV: 10,7 cal/cm², HAF 72,5% (regarding the stretch material).

Flame resistant inherent trousers with stretch

Dirt and water-repellent flame resistant trousers with stretch function. The ideal work trousers with a high level of comfort for people who work in exposed environments. Fitted with smart details such as stretch panels for increased freedom of movement and flexibility. 
The fabric is inherent with high wear resistance. CORDURA®/Kevlar®/Protal®- reinforcement on the knees, folding ruler and knife pocket with space for a phone. Specifically suitable for jobs such as an electrician and similar categories of work. 
Certified to EN 14404, EN 1149-5, EN ISO 20471, EN ISO 11612, IEC 61482-2.

Multinorm Inherent trousers with stretch

Dirt and water-repellent trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. 
The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees. They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. 
Ripstop fabric delivers exceptional tear strength. Tested and approved for 50 washes. 
Certified under EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, IEC 61482-2. ATPV: 11 cal/cm², HAF: 79,3%, LOI: 29,6%. 
Together with jacket 4089, class 3 is achieved according to EN ISO 20471. Tested for industrial washing EN ISO 15797.

Multinorm Inherent trousers

Trousers with outstanding strength to weight ratio. The fabric is inherently flame retardant, which means that the flame retardant properties are naturally present in its fibres. The trousers have CORDURA®/Kevlar®/Protal® reinforced panels on the knees. 
They feature many smart pocket solutions designed to meet certification standards. Pockets subject to excessive wear are reinforced with double thickness to extend their life. Ripstop fabric delivers exceptional tear strength. 
Certified under EN 1149-5, EN 13034 PB [6], EN ISO 20471, Class 1. When combined with 4089 XS-S, they achieve Class 3 certification under EN ISO 20471. EN ISO 11611, Class 1 A1+A2, EN ISO 11612 A1, A2, B1, C1, E1, F1, IEC 61482-2, Class 1. ATPV: 11.9cal/cm², HAF: 79.3%, LOI: 29.6%.