Gender

Colour

Certification

Collections

Flame resistant collection

Function

Hi-vis co-certification

Hi-vis classification

Hood

Lining

Material

Sustainability Label

Type of garment

Type of jacket

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

NEW COLOUR!

Inherent flame resistant fabric, good protection level, designed for environments with demands on high-vis orange, with FR polyester, PFAS free. Certifications: EN ISO 11611, EN ISO 11612, EN 1149, EN 61482-1-1, EN 61482-1-2

Lightweight 3-layer softshell fabric with 4-way stretch. Wind- and waterproof, breathable.

Soft and comfortable fleece quality with one side brush.

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1516 is a flame resistant fabric, carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Quality 1514 is a flame resistant fabric carefully chosen to create the best combination of strength and comfort. High proportion of cotton provides clothes that are comfortable to wear. The fabric is certified for EN 1149-3, EN 61482-1-2, EN  IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Wind and waterproof fabric with a lot of stretch for good compliance and freedom of movement.

Wind- and waterproof fabric with breathable function.

Wind- and waterproof fabric with breathable function and stretch effect.

Inherent flame resistant and polyester free material with laminate and a soft inside made of fleece. Wind- and waterproof. The material is certified accordning to: EN ISO 11611, EN ISO 11612, EN 1149-5, EN 61482-1-2, EN ISO 20471, EN 13034, EN 343

A jacket made from a soft, flexible and durable inherent material with a light lining on the inside. This combination makes the jacket approved for APC 2, the higher protection class for electric arc. 
The model is equipped with smart pocket solutions such as twin chest pockets with covered zips. This is a metal-free model with plastic components. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, IEC 61482-2 – protection against thermal hazards of an electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as men’s model 44181524.

Women’s APC 2 Multinorm Inherent Jacket

A lightly lined winter softshell jacket that is extremely soft, comfortable and flexible thanks to its fabric. The jacket is two-tone with predominantly dark sections, which resists dirt very well while still delivering high visibility when it matters most. Air-mesh lining optimises circulation in the jacket, allowing it to breathe and release excess heat and moisture. 
This hi-vis jacket has both the light, stretchy feel and the strength a work garment should have. The fabric is windproof and waterproof yet highly breathable. It also features a detachable hood. Certified to EN ISO 20471, Class 1 – high visibility. 
Also available as men’s model 4489.

Women’s Hi-Vis Lightweight Lined Winter Softshell Jacket

A technically advanced jacket in inherent flame-resistant fabric with flame resistance built into the fibre structure. This version is hi-vis orange with a different fabric quality than its hi-vis yellow sibling and is durable yet lightweight with smart pocket solutions. Pre-bent sleeves, extended back hem and adjustable hem. 
PFAS-free and approved for industrial laundering at 60°C. Developed to function safely and reliably in ATEX-classified environments. 
Certified to EN ISO 11611 – protection for welding and similar processes, EN ISO 11612 – protection against heat and flame, EN 1149 – antistatic protection, EN 61482-2 – protection against electric arc, EN 13034 – protection against liquid chemical splashes, EN ISO 20471-2 – high visibility, OEKO-TEX® Standard 100 – tested for harmful substances. 
Also available as men’s model 40891524.

Women’s Multinorm Inherent Jacket

Stylish hoodie that is great for wearing both on and off the job. This polyester hoodie features a full-length zip and a slightly longer neck. Drawstring at the hem. 
Black, discreet reflective trim on the front and hood, plus a chest pocket with space for logo decoration.

Womens's Hoodie with full-length zip

A women's fit industrial jacket in a soft, supple, comfortable, highly durable quality. The metal-free (buttons and covered zips in plastic) jacket has dirt- and water-repellent properties. Hidden chest pocket with zip, two front pockets with flaps and press studs, and loops for a microphone, oximeter or other technical device. 
Extended, width-adjustable back, and the cuff width is also adjustable using press studs. The collar can be closed with two press studs for extra protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Women's Inherent Jacket

Durable anti-flame jacket with women’s fit that has a robust hidden one-way metal zipper and practical pockets. Bellowed back panel and pre-bent elbows for improved comfort. 
Reflective details for increased visibility. Industrially washable. The material is oil, dirt and water repellent. 
Certified according to EN 1149-5, IEC 61482-2. EN ISO 11611. EN ISO 11612. EN 13034. ATPV: 16,0 cal/cm².

Women's flame resistant Jacket

An dirt- and water-repellent overshirt with enhanced visibility in a soft, supple quality, characterized by high comfort and durability. This women's fit garment is a functional cross between traditional industrial jacket and modern shirt. 
It is completely metal free, and has plastic press studs and a plastic two-way zip. Covered, bellowed chest pockets with plenty of room for a mobile phone, note pad and other equipment. An exterior holder for e.g. a pen or glasses on the left side. 
Holders for an oximeter, microphone or other technical device above each chest pocket. The collar has press studs on the front for extra protection when needed. Pre-bent sleeves and cuffs adjustable in two different widths with press studs. 
Back hem extended for extra comfort. Heat-applied reflective details on shoulders, back and lower sleeves. Tested and approved for industrial washing - EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2.

Women's Inherent Overshirt

Oil, dirt and water-repellent multinorm jacket with a women’s cut, made from durable material and designed to be visible from every side. Shorter at the front for maximum freedom of movement, and an extended back hem for protection. 
The jacket has chest pockets both sides, and features smart details such as an inside pocket with interior phone pocket, and dark fabric on areas exposed to dirt. Tested for industrial laundry. Protects against splashing from liquid chemicals. 
Certified to EN 1149-5, EN 13034, EN ISO 20471, EN ISO 11611, EN ISO 11612, IEC 61482-2, ATPV: 11.0 cal/cm².

Women's Multinorm jacket

Lightly lined women’s fit winter softshell jacket with a two-way zip, in a material that makes it extremely soft, supple and comfortable. The jacket has two colours and offers optimum visibility and safety when it’s most needed. This designed hi-vis jacket boasts both the light, stretchy feel and the durability of a good work garment. The material is waterproof, windproof and has excellent breathability. A flap over the zip enhances windproofness, and the jacket comes with a detachable hood. Also available in a men’s cut 4400.

Women's Hi-vis Lightweight lined Winter Softshell Jacket

Wind- and waterproof shell jacket with taped seams, providing full protection against the elements when it's needed most. This women's fit jacket with a two-way zip and thin mesh lining is made of fantastically soft and supple four-way stretch. 
Also available in a men's model 4483.

Women´s Shell Jacket Stretch

A light softshell jacket in a women’s cut, in a material that makes it extremely soft, supple and cozy. This hi-vis jacket has a chest pocket and two-way zip at the front, and boasts both the light, stretchy feel and the durability of a good work garment. Also windproof, waterproof and breathable. Detachable hood. 
Also available in a men’s model 4494.

Women’s Hi-Vis Softshell Jacket

Air mesh-lined winter jacket that is perfect for wearing during colder winter conditions. Wind and waterproof with breathability and taped seams. The jacket in a women’s fit is made of fantastically comfortable and soft 4-way stretch.
Also available in a men’s model 4484.

Women's Lightweight lined Winter Jacket Stretch

Class 1 hi-vis shell jacket with a comfy, spacious fit. The jacket is wind and waterproof with taped seams and has a brushed mesh lining for extra comfort and temperature regulation. The hood is detachable and adapted for helmets and ear defenders. 
Also available in a men’s model 4420.

Women’s Hi-Vis Shell Jacket

Shell jacket in a women’s cut, Class 2 hi-vis, keeping you visible when you need it most. The jacket is wind and waterproof with taped seams, and the hood is detachable and adapted for helmets and ear defenders. Two-way zip at the front and ventilation in the back. 
Also available in a men’s model 4435.

A metal- and polyester-free softshell jacket made from inherently flame-resistant material. The oil-, dirt- and water-repellent jacket is crafted from comfortable 3-layer softshell material that is wind- and waterproof with excellent breathability. 
The fleece interior provides a cosy feel, enhancing comfort. An extended back adds to the overall comfort. The jacket is equipped with two gas loops for attaching gas detectors, oxygen meters and microphones, making it particularly useful for work in petrochemical environments or the oil and gas industry. 
Certified according to EN 1149-5, EN 13034, EN ISO 11611, EN ISO 11612, and EN 61482-2 APC 2. EBT - 33 cal/cm², ELIM - 30 cal/cm².